E-CIGARETTE RESEARCH STUDY

For board moderators, ecigForum.net Management gave previous approval on 4/22/14 for this message to be posted. Thanks!

e-cigARETTE RESEARCH STUDY

You are invited to participate in a study regarding the effects of nicotine in e-<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid on anxiety, conducted by Jonathan Baker at Keiser University Graduate School. The study involves a 26 question survey which will take 5-10 minutes to complete. There is no compensation for participation.

If you are at least 18 years old, use e-cigarettes, and would like to participate in this study, please visit the link below to access the survey:

<a href="http://esurv.org?u=ecigs_and_anxiety” target=”_blank”>http://eSurv.org?u=ecigs_and_anxiety

E-CIGARETTE RESEARCH STUDY

For board moderators, ecigForum.net Management gave previous approval on 4/22/14 for this message to be posted. Thanks!

e-cigARETTE RESEARCH STUDY

You are invited to participate in a study regarding the effects of nicotine in e-<a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid on anxiety, conducted by Jonathan Baker at Keiser University Graduate School. The study involves a 26 question survey which will take 5-10 minutes to complete. There is no compensation for participation.

If you are at least 18 years old, use e-cigarettes, and would like to participate in this study, please visit the link below to access the survey:

<a href="http://esurv.org?u=ecigs_and_anxiety” target=”_blank”>http://eSurv.org?u=ecigs_and_anxiety

General Vaping Discussion • Re: Tight draw using T2

efine50 wrote:
Aww Unc… Not a problem. We’re not ready to send you out to pasture quite yet. <img src="http://ecigfortmyers.com/wp-content/plugins/wp-o-matic/cache/ef3bde8d39_icon-e-smile.gif” alt=”:-)” title=”Smile” /> Care to share where you get your connectors?

Sent from my SPH-L710 using Tapatalk

You should be able to get 510/ego connectors anywhere.

If you have not yet place your battery order with MV here you go.

<a href="http://www.madvapes.com/510battery-to-ego-atomizer-adapter.html” rel=”nofollow”>http://www.madvapes.com/510battery-to- … apter.html

Your B&M should have them as well.

Kinda like your local grocery store should have milk and white bread.

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=680″>UncleRJ — Sat May 17, 2014 7:10 pm


General Vaping Discussion • Re: Tight draw using T2

Aww Unc… Not a problem. We’re not ready to send you out to pasture quite yet. <img src="http://ecigfortmyers.com/wp-content/plugins/wp-o-matic/cache/ef3bde8d39_icon-e-smile.gif” alt=”:-)” title=”Smile” /> Care to share where you get your connectors?

Sent from my SPH-L710 using Tapatalk

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=4527″>efine50 — Sat May 17, 2014 6:41 pm


General Vaping Discussion • Re: Tight draw using T2

I am quite embarrassed that I did not mentin that.

I use a 510/ego adapter on all of my mods as cheap insurance to protect the original threads and it allso helps with adjusting the airflow if need be.

Does Dr. Kevorkian still make house calls on old folks that need to be put down?

SIGH!

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=680″>UncleRJ — Sat May 17, 2014 5:51 pm


General Vaping Discussion • Re: Tight draw using T2

scalewiz wrote:
On the T2, all of the airflow has to come up through the center tube. As Uncle RJ wrote, blow out the center tube to keep it clear of excess <a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid. You may try to deepen the 4 slots on the MVP connector to make it easier for air to enter the chamber on the bottom of the T2. And finally, try using a 510 to ego connector on top of the MVP. It does make things a little taller, but often helps.

I made sure the center tube was clear of any excess <a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid.
Since the airflow on my Kanger mini protank is fine I’ll get the 510 to ego connector for my T2’s and hope that helps.
Thanks! <img src="http://ecigfortmyers.com/wp-content/plugins/wp-o-matic/cache/3a174b876f_icon-e-smile.gif” alt=”:)” title=”Smile” />

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=4527″>efine50 — Sat May 17, 2014 4:47 pm


General Vaping Discussion • Re: Tight draw using T2

On the T2, all of the airflow has to come up through the center tube. As Uncle RJ wrote, blow out the center tube to keep it clear of excess <a href="http://www.vapininthecape.com/eliquid_c_7.html”>liquid. You may try to deepen the 4 slots on the MVP connector to make it easier for air to enter the chamber on the bottom of the T2. And finally, try using a 510 to ego connector on top of the MVP. It does make things a little taller, but often helps.

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=2918″>scalewiz — Sat May 17, 2014 4:20 pm


General Vaping Discussion • Re: Special Roast Contest Thread

COME ON!

My ECA family can do better than this <img src="http://ecigfortmyers.com/wp-content/plugins/wp-o-matic/cache/3a174b876f_icon-redface.gif” alt=”:oops:” title=”Embarrassed” />

MAKE THIS FUN!

Plenty of old age jokes, bad hair jokes and BO jokes yet to be realized…………..

Lets not forget about my strange devotion my "Weenie" for Gods sake.

And Evil Uncle in the sub, sub,sub basement……………..

Evil Uncle RJ.jpg

And his pet WTF…………Ralph (think fresh vomit sound).

Evil Uncles Dog.jpg

You can do much better than this!

Statistics: Posted by <a href="http://www.ecigadvanced.com/forums/memberlist.php?mode=viewprofile&u=680″>UncleRJ — Sat May 17, 2014 4:07 pm