Charlie’s Chalk Dust £5.26 for 30ml

Over at <a href="https://red<a href="<a href="”>eliquid_c_7.html”>” target=”_blank” rel=”nofollow”>https://red<a href="<a href="”>eliquid_c_7.html”>

Click on Cyber Friday and there's a whole raft of reductions still active including Charlie's Chalk Dust.

They have 30ml and 15ml bottles and where the 30ml are sold out you have to be a bit creative, I vape 3mg so with most of them you have to buy combinations so for example Head Banging Boogie, 1x15ml bottle at 6mg and 1x 15ml bottle at 0mg to mix together for the 3mg.

But for just over a fiver for 30ml its a real bargain for this <a href="<a href="”>eliquid_c_7.html”>juice.

IJOY Combo, Griffin 25, SMOK TFV8, Wismec RX 2/3 Codes.

Hi everyone, I have some discount codes I have been asked to pass on for a few different atomisers and a mod.

First off, the Ijoy Combo RDTA. Use the code CYcombo to get it for $19.99.

Secondly, the Geekvape Griffin 25 RTA. Use the code CYgriffin to get it for $20.99.
Then there…

IJOY Combo, Griffin 25, SMOK TFV8, Wismec RX 2/3 Codes.

Hi, i need advice for someone else.


I have been given the responsibilty of choosing a ecig set for my cousin I personally use kangertopbox and aim to upgrade to smok alien.

I dont know a lot about vaping to suggest someone else a mod, which is why im here. He is using an ego aio in singapore(ecigs are not allowed to be sold). He will be visiting US, stocking up and needs a mod that has rebuildables so that he doesnt have to worry about buying new coils. He is new to vaping and i dont know if i should suggest him a mod that has internal battery or replaceable.

Please let me know if you need to something else.

Oh and his budget is $70-80(that would wires, cotton, coil jig, mod, battery)

submitted by /u/tjun235
[link] [comments]

Question about my Alien reading ohms on my beast.

Hey everyone! I just upgraded from an Atom Yakuza and toptank to a Alien with a Beast and I love it! Been rocking it for 4 days now but I'm having one small problem. I'd say every 50-100 pulls it'll ask if I have a new coil, which I don't. Then it'll display that it's seeing anywhere from 1.00 to 2.50 ohms! I have to unscrew the atty and screw it back in go through the "new coil Y/N?" screen multiple times until it reads back around the .15 it should be at which doesn't seem right. I'm on the newest firmware. I took a trip to my local B&M and of course I couldn't replicate the problem for them while I was there. I always clean the pin and connector, and I know the floating pin in the tank might be the culprit but it seems good not loose or anything. I've taken it apart a few times and even switched from the V8 to the other coil and same problem occurs. Any insight is appreciated!

Thanks guys and gals!

Quick second question: I'm seeing the mod read PCB temps around 34-37 degrees Celsius, is this too high? Should I back off at a certain point? This only happens when I chain vape it in the car mindlessly because of traffic.

submitted by /u/good_morning_magpie
[link] [comments]

Looking for a sub-ohm tank

A friend of mine is switching to vaping and wants to go directly to a mod & sub-ohm tank kit, so we skip the AIO/ego-style vapes. He wants a sub-ohm tank with both pre-made coils and an RBA head in case he wants to wander into making his own.

My knowledge is limited since I've been with my Avocado for a long time and I stopped caring for pre-made coils since Uwell Crown, which is my suggestion to my pal for now.

What do you think?

submitted by /u/The_Ronin_D
[link] [comments]

Thicker juice in the nautilus mini

I've got a question for the Aspire Nautilus Mini owners. I just ordered one online, and I'm wondering how does it work with thicker e-<a href="<a href="”>eliquid_c_7.html”>juices? I currently have a 100ml bottle of 80% VG, 20% PG <a href="<a href="”>eliquid_c_7.html”>juice, and I've been told that the Nautilus Mini works better with thinner e-<a href="<a href="”>eliquid_c_7.html”>juices. Am I gonna get any dry hits?

submitted by /u/-LukaV-
<a href="<a href="<a href="”>eliquid_c_7.html”>juice_in_the_nautilus_mini/”>[link] <a href="<a href="<a href="”>eliquid_c_7.html”>juice_in_the_nautilus_mini/”>[comments]

Daily Questions Thread [11-27-2016]

If you have questions about <a href="<a href="”>eliquid_c_7.html”>juice, vendors, mods or anything vaping related, please feel free to ask them below.

Here are some helpful links-

Starter Guide

Everything I wish I knew about rebuildables

Infographic that every new user should see courtesy of /u/emergenl

/u/Jimmith's beginners guide to vaping

submitted by <a href="”> /u/Automoderator
[link] [comments]